Wfview Icom Interface and ACLog Solution
Please see my previous post for more screen captures and video.
While in Florida I was using these two programs together along with WSJT-X. (More on WSJT-X later.) They worked beautifully together.
My Wfview and ACLog Solution
I am using VSPE to split the USB COM port (COM5 to COM1) and a CI-V cable is used for ACLog rig control. The USB cable, COM1, is used for Wfview. Wfview needs the USB cable because it has a 115200 baud rate.
Because COM1 is the product of VSPE, I can use it for CW keying in ACLog. If you don't need CW transmit in ACLog you don't need to add VSPE into the mix.
So COM1 is used for Wfview and CW keying in ACLog. The CI-V cable is used soley for ACLog rig control. See screen captures below.
-
- ACLog Transmit CW Settings
-
- ACLog Rig Control
This is a neat little portable CW paddle.
Video - Watch this video for further information.
WSJT-X, Wfview and ACLog
I have WSJT-X using Rigctld which is activated in Wfview. So if you want to get ahead, try this setting below for WSJT-X.
Thank you
I’ll have more on this topic in an upcoming video. You can follow Mr. B. and myself on our travels using Twitter, Facebook, Instagram and/or YouTube.
If you have any questions about Wfview, please ask them here. I prefer the comment section here or in YouTube over e-mail because your comments and questions will help others as well.
Thank you for subscribing to this website. I sincerely appreciate it. Please send a question I can turn into a YouTube #Short or #TechTips video.
Have you seen Ham Radio Tees by KØPIR?
Stay in touch, stay safe and best 73,
Rich, K0PIR
Sources:
